Page tree

Should you require any more information or have encountered a problem, please call the support helpdesk on (07) 5456 6000.

Skip to end of metadata
Go to start of metadata

 

Overview

This guide provides a basic overview on configuring the Medical-Objects Download Client (Capricorn) and GPComplete Practice software to import electronic results. 

If you require any assistance with the installation or configuration, or if you have any questions, please contact the Medical-Objects Helpdesk on (07) 5456 6000.

If you have not Installed the Medical-Objects Download client, Please see the guide for Installing Capricorn on Windows.

Configuring Capricorn Software

Accessing the Capricorn Configuration Window
 

Note:

In some cases, the Capricorn may be configured as a service. See this guide for instructions on how to launch the Capricorn if it is set up as a service. 


  1. To launch the HL7 Tray application, Go to Start Menu, All Programs, Medical-Objects and select the Medical-Objects Capricorn. Alternatively, You can go to C:\MO\Capricorn and run the Capricorn.exe.
     
  2. The following icon will appear in the tray. Double click on it to bring up the log window.



  3. When the log window is displayed, Click on the Configuration icon highlighted below, or select Utility and select Configuration.

     

Capricorn Configuration Settings

  1. Click on Integration Options.



  2. Set the ACK Management path as below:

    (Capricorn installed on a GPComplete Server Machine) --> C:\Program Files\GPComplete\Service\Acksent\
    
    (Capricorn installed on a GPComplete Client Machine) --> \\server\GPComplete\Service\Acksent\
    


    Note:

    If the folder does not exist, You must create it.


  3. Check that the Incoming Modifier is set to GP Complete Modifier.



  4. Select Server Parameters from the left panel.



    The paths above are set as follows:

    (Capricorn installed on a GPComplete Server Machine) --> C:\Program Files\GPComplete\Service\RecFiles\
    
    
    (Capricorn installed on a GPComplete Client Machine) --> \\server\GPComplete\Service\RecFiles\

    Note:

    If the folder does not exist, You must create it.

  5. The Medical-Objects configuration is complete. Click Apply and OK.

Importing Into GPComplete

GPComplete does not require any configuration from Medical-Objects to import results. Below are the steps to manually import results.

  1. Open the GPComplete main window.


     
  2. Choose Reports from the top menu. Select Results and select Download Results.



  3. Results will download into GPComplete. If there are no new results, the below message will show. Select Open InTray to view results.



If the results haven’t been imported into the InTray, you may need to close the InTray and reopen it to allow it to refresh and list the imported results.

  • No labels