Should you require any more information or have encountered a problem, please call the support helpdesk on (07) 5456 6000.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Overview

This article is to assist with the setup of Medical Objects and Direct Control

Setup


Direct CONTROL version 22.2.7.1 or higher is required. This can be checked in the top right corner of Direct CONTROL

Capricorn 3.2.13.138 or higher is also required.

Configuring Capricorn Software

Accessing the Capricorn Configuration Window
 


  1. To launch the HL7 Tray application, Go to Start Menu, All Programs, Medical-Objects and select the Medical-Objects Capricorn. Alternatively, You can go to C:\MO\Capricorn and run the Capricorn.exe.
     
  2. The following icon will appear in the tray. Double click on it to bring up the log window.



  3. When the log window is displayed, Click on the Configuration icon highlighted below, or select Utility and select Configuration.

     

Capricorn Configuration Settings

  1. Click on Ack Management.


  2. Due to current malformed acknowledgements error (See warning at top of page). Make sure the ACKManagement Path is blank. 

  3. Click on Integration Options. 
    3.1 Check that the Incoming Modifier is set to Direct CONTROL



  4. Select Server Parameters from the left panel.



    The paths above are set as follows:

    (Capricorn installed on a Direct CONTROL Server Machine) --> C:\Program Files\GPComplete\Service\RecFiles\


(Capricorn installed on a Direct CONTROL Client Machine) --> \\server\GPComplete\Service\RecFiles\
  5. The Medical-Objects configuration is complete. Click Apply and OK.

Direct CONTROL Import Configuration

In Direct CONTROL navigate to  Utilities → Configure

HL7 In

INSERT UPDATED HL7 In SCREENSHOT HERE

If paths are not populated click "Load Defaults" then "Install/Upgrade"

Set the download path under tick boxes right now.

Select "Start" button

HL7 Out

This is currently only for return acknowledgements sending messages directly from Direct CONTROL has not been finalised.

Set the "Save Acknowledgement messages to:" path.

Inbox

Regular Tasks --> Communications/Results

  • No labels