Page tree

Should you require any more information or have encountered a problem, please call the support helpdesk on (07) 5456 6000.

Skip to end of metadata
Go to start of metadata


Printing in Meridian is straightforward, however you can also pre-configure a number of settings for specialised purposes.

Use the following procedure to Setup your printer/s:


  1. Open up the Configuration Editor selecting View > Configuration Options... from the Menu Bar or alternatively you can press the F12 button.

  2. Find the Printer setups item on the list on the left hand side of the page shown below. This will open up the Printer Setups box on the right hand side of the same page. This box shows a list of printer configurations that have already been installed


    If this is first time you have setup a printer this list may be empty.

  3. To modify an existing configuration, select the configuration in the list and select the Edit button, or to add a new configuration select the Add button. Both will open up the Printer Setup form where you simply select a printer(shown below) and give the configuration a meaningful name.


    You must have the printers installed on the computer before they will appear on the list.

  4. To configure the printer itself you need to open up the printer settings dialog via the Edit Settings button. These settings will be saved and only used when this configuration is used.

  5. Once all configuration is complete you will need to select the OK or Apply button to save.

  • No labels