This guide provides instructions on configuring both Medical-Objects Capricorn and Practix software to import electronic results.
If you require any assistance with the installation or configuration, or if you have any questions, please contact the Medical-Objects Helpdesk on (07) 5456 6000.
If you have not Installed the Medical-Objects Download client, Please see the guide for Installing Capricorn on Windows.
|In some cases, the Capricorn may be configured as a service. See this guide for instructions on how to launch the Capricorn if it is set up as a service.|
From the left hand panel, Select Integration Options.
Set the Folder for ACKS to the folder Practix will be outputting them to - Typically C:\msp\resultsimport\ACKs. The same import path will need to be added to a contact in Practix, outlined later in this guide.
Make sure at the bottom of the panel that under Incoming Modifier, The Practix HL7 Modifier is set as shown below.
In the left hand panel, Select Report Scanning.
In the Report Scanning window, set the path to create a MO-Images folder in the same path as the ACKs folder as shown below.
Once you have typed in the path, a message window will pop up and ask if you want to create the path.
Select OK to create the path.
The Message Source Exceptions exclude the sending facilities that have a related contact within Practix. These can be set up in the Practix configuration steps later in this guide. Otherwise all the sending facilities will be identified as being sent from Medical-Objects and not their own identity. For this example we will use Southernex Imaging.
Select Message Src Exceptions from the left hand panel of the Capricorn configuration window.
Click Add as shown above, and select Lookup Sending Facility HD. Do not use any other selection.
A new window will appear called Select Identifier.
Enter Southern and press Enter or click the Lightning Bolt to search.
Select Southernex Imaging from the display panel.
The following Message Source Exception window will appear.
Click OK to leave all the details blank.
Repeat this step for each of the Pathology and Radiology sites that send to the Practice.(e.g. In this case QHPS (Nata 2639) and Southernex Imaging).
In Message Output Directory (main) Enter the path for the Download client to drop off results to. Typically, this is C:\msp\resultimport.
This part of the install may be repetitive as you will be adding each of the Pathology and Radiology sending facilities into Practix and configuring them. If the Pathology or Radiology sending facility does not use Medical-Objects, Do not create a contact for them.
Once you click Messages In, the following window will appear.
If you are editing an existing Messages In entry for Medical-Objects, Select Medical-Objects from the Receive From drop-down list. The entry will then be displayed for you to edit
Select Company and then enter in the companies details. When you are finished, click Message In.
Make sure the Radiology Request tab is filled out as above.
Once you have clicked the Message In button, the following window will appear.
If you are editing an existing Messages In entry for the Radiology Company, Select the company from the Receive From drop-down list. The entry will then be displayed for you to edit.
Perform a search for the Pathology sending facility you are about to add. For example, Queensland Health Pathology Services. If the Facility exists; click the name and click Select, otherwise click New to create it.
Select Company and then enter in the companies details and then click Message In.
Make sure the Pathology Request tab is filled out as above.
Once you have clicked the Message In button the following window will appear.
If you are editing an existing Messages In entry for the Pathology Company, select the company from the Receive From drop-down list. The entry will then be displayed for you to edit
Enter the Pathology Company’s details as shown above. (The drive letter and path may vary depending on the folder location that the practice has designated for imports).
Click Add to setup the receiving type.
Select the ORU^R01-Result as the Message Type then Click OK.
Click Save on the Receive Message From window.
Click Close on the Receive Message From window.
Click OK on the Contact window.
Click Close on the Find Contact window.
The configuration for Practix is now completed.