This guide provides instruction on configuring both Medical-Objects Capricorn and ZedMed software to import electronic results.
If you require any assistance with the installation or configuration, or if you have any questions, please contact the Medical-Objects Helpdesk on (07) 5456 6000.
If you have not Installed the Medical-Objects Download client, Please see the guide for Installing Capricorn on Windows.
In some cases, the Capricorn may be configured as a service. See this guide for instructions on how to launch the Capricorn if it is set up as a service. |
Set the ACK Management path to the local Import folder on the server or the network path on a workstation, that points to the server import folder.
For example:
Newer Versions of ZedMed
(Capricorn installed on the Server) --> C:\Zedmed\Download\MoAcks Or (Capricorn installed on the Workstation) --> \\server\Zedmed\Download\MoAcks |
Older Versions of ZedMed
(Capricorn installed on the Server) --> C:\Patients\Download\MoAcks Or (Capricorn installed on the Workstation) --> \\Server\Patients\Download\MoAcks |
If the folders do not exist, you must create them. |
Under the Message Output Directory (main) set the results import path.
The path can be different depending on where the Capricorn is installed.
For example:
Newer Versions of ZedMed
(Capricorn installed on the Server) --> C:\Zedmed\Download\ Or (Capricorn installed on the Workstation) --> \\server\Zedmed\Download\ |
Older Versions of ZedMed
(Capricorn installed on the Server) --> C:\Patients\Download\ Or (Capricorn installed on the Workstation) --> \\Server\Patients\Download\ |
If the folders do not exist, you must create them. |
Click the Add button highlighted above.
Queue Name --> ZEDMED SENDING Base Directory --> C:\Zedmed\Upload\MO Will need to create a subfolder within C:\Zedmed\Upload for our going reports. Eg: C:\Zedmed\Upload\MO. This is to prevent multiple companies pulling reports from the same directory. |
See Step 6b.
In the window that appears, Click the Add button. Add the following decorators by searching each one and clicking OK.
Specify file mask --> Set to 'PIT' Strip Non PIT lines Convert PIT to HL7 --> (Leave settings as they are) Route with Capricorn |
Set the download path to the Message Output Directory path set earlier, for example
\\server\Zedmed\Download\ |
If possible, Use a UNC path.
Set the upload path to the ACK management path set earlier. For example:
\\Server\Patients\Download\MoAcks |
Select the Communications tab, and the General tab. Then, set the Send Path to:
\\SERVER\Zedmed\Upload\MO |