This article is to assist with the setup of Medical Objects and Direct Control
|
In some cases, the Capricorn may be configured as a service. See this guide for instructions on how to launch the Capricorn if it is set up as a service.
Select Server Parameters from the left panel.
The paths above are set as follows:
(Capricorn installed on a Direct CONTROL Server Machine) --> E:\InstallFolder\DirectControlServerFiles\HL7\HL7In\ (Capricorn installed on a Direct CONTROL Client Machine) --> \\server\InstallFolder\DirectControlServerFiles\HL7\HL7In\ |
If the folder does not exist, You must create it.
In Direct CONTROL navigate to Utilities → Configure
If paths are not populated click "Load Defaults" then "Install/Upgrade"
Change settings as required.
Set the download path in HL7 In Location as the first setting in HL7 Basic Setup.
Select "Start" button
This is currently only for return acknowledgements sending messages directly from Direct CONTROL has not been finalised. |
Set the "Save Acknowledgement messages to:" path.
Regular Tasks --> Communications/Results
If Direct CONTROL was not able to find a match for an existing Client, the documents will appear in the Unallocated tab. |