Overview

This guide assumes you have the Medical-Objects extension installed into Medilink. If you do not, you will need to contact Medilink before proceeding, Or install the Medical-Objects software as PDF output only. The instructions for PDF Output can be found at the link below.

Capricorn PDF Output 

Configuring Medical Objects Capricorn

1. Double click the HL7 tray icon.
   
   

   
2. The Log window is displayed.
   
   
   
    
3. Click the Edit Server Properties icon. 
   
   
    
4. Click on Integration Options.
   
   
   
   Set the ACK Management to the Application Acks folder within the Capricorn application.
   
   for example:
   
   C:\MO\Capricorn\APPLICATION_ACKS
    
5. Make sure the Modifier is set to Capricron Modifier.
    
6. Select Server Parameters from the left panel.
   
   
   
   Under the Message Output Directory (main), set the results import path
   
   The Typical output path for Medilink is
   
   C:\MO\Capricorn\ACTIVE
    
7. The configuration is complete. Click Apply and OK

Configuring Medilink

1. Open Medilink, and you will see the window below.
   
   
    
2. Go to File > General Options. 
   
    
   
   
3. In General Options, Make sure 'Run MediLinkItOn This PC' is checked and 'Use Old Letters' Is unchecked. Click OK to close this window.
   
   
    
4. In the Taskbar notification area, You should see two Medilink 'diamond' icons appear, one of which will have a little mini MO icon, right click it and chose 'Setup'.
   
    
   
   
5. A small window with a path in it will appear, here you can set the path for MediLink to import results.
    
   
    
6. The taskbar application will run periodically. When messages come in from providers, they will be processed by Medilink. A popup will appear asking if you wish to process the results.