Should you require any more information or have encountered a problem, please call the support helpdesk on (07) 5456 6000.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 14 Next »

Overview

This guide provides an overview for the configuration of the Medical-Objects Download Client (Capricorn) and Medilink software for electronic Results. Medilink requires that you have the Medical-Objects extension installed into Medilink. If you do not, you will need to contact Medilink before proceeding to obtain this extension, Or install the Medical-Objects software as PDF Output only. The instruction for PDF Output can be found here.

If you require any assistance with the installation or configuration, or if you have any questions, please contact the Medical-Objects Helpdesk on (07) 5456 6000.

If you have not Installed the Medical-Objects Download client, Please see the guide for Installing Capricorn on Windows.

Configuring Capricorn Software 


  1. To launch the HL7 Tray application, Go to Start Menu, All Programs, Medical-Objects and select the Medical-Objects Capricorn. Alternatively, You can go to C:\MO\Capricorn and run the Capricorn.exe.
     
  2. The following icon will appear in the tray. Double click on it to bring up the log window.



  3. When the log window is displayed, Click on the Configuration icon highlighted below, or select Utility and select Configuration.

     

  1. Click on Integration Options.



    Set the ACK Management to the Application Acks folder within the Capricorn application.

    for example:

     

    C:\MO\Capricorn\APPLICATION_ACKS
  2. Make sure the Modifier is set to Capricron Modifier.

  3. Select Server Parameters from the left panel.



    Under the Message Output Directory (main), set the results import path

    The Typical output path for Medilink is:

     

    Capricorn installed on a Workstation --> \\Server\Medilink\Results\In
Capricorn installed on a Server      --> C:\Medilink\Results\In
  4. The configuration is complete. Click Apply and OK

Configuring Medilink

 

  1. Open Medilink, and you will see the window below.


     
  2. Go to File, and select General Options. 

     

  3. In General Options, Make sure 'Check Medical Objects' is checked. Click OK to close this window.


     
  4. In the Taskbar notification area, You should see two Medilink 'diamond' icons appear, one of which will have a little mini MO icon, right click it and chose 'Setup'.

     

  5. A small window with a path in it will appear, here you can set the path for MediLink to import results.
     

     
  6. The taskbar application will run periodically. When messages come in from providers, they will be processed by Medilink. A popup will appear asking if you wish to process the results.

  • No labels