Overview

Provide a procedure to install and configure Medical-Objects Capricorn and Medical Spectrum software to import electronic results.

Capricorn Configuration settings

1. Double click the HL7 tray icon
   
   
   
   

   
2. The log window will be displayed.
   
   
   
   
3. Click the Edit Server Properties icon.
   
   
4. Select the Integration Options in the left panel.
   
   

5. Make sure at the bottom of the panel that under Incoming Modifier that Spectrum HL7 Modifier is set, as shown below.
   
   

   

   
6. In the left hand side panel, select Server Parameters.
   
7. In Message Output Directory (Main), Enter the path for letters to be imported in to. For example, C:\MO\Letters\
   
   
   
   
8. Enter the Pathology and Radiology paths as shown above. 
   
   Pathology – C:\MO\Path
   Radiology – C:\MO\Rad
    
9. Click apply and OK.
   
   The Configuration for Medical Spectrum is complete.

Configuring Medical Spectrum Classic

Medical-Objects Letters

1. Open Medical Spectrum.
    
   
    
2. Click on the System Icon.
    
3. The following window will open.
    
   
   
   
4. Click System Setup.
    
5. Click Pathologists/Radiologists.
   
   
    

6. Enter MO in the Id Number field and press TAB.
   
   

   
7. If it is a new record, the following window will appear.
   
   
   
   
8. Click Yes.
   
   
   
   
9. Enter in the above information (Make sure your data is accurate as you cannot delete the contact once it has been saved). 
    
10. Click Save.
     
11. Click Exit.

Medical-Objects Pathology

1. We follow the same steps taken in the first section as shown below.
   
   
    
2. Enter MP in the Id Number field and press TAB.
    
   
    
3. If it is a new record the following window will appear.
    
   
    
4. Click Yes.
    
   
    
5. Enter in the above information (Make sure your data is accurate as you cannot delete the contact once it has been saved)
    
6. Click Save.
    
7. Click Exit.

Medical-Objects Radiology

1. We follow the same steps taken in the first and second sections as shown below.
   
   
    
2. Enter MR in the Id Number and press TAB.
   
   
   
   
   
3. If it is a new record the following window will appear.
   
   
    
4. Click Yes.
    
   
    
5. Enter in the above information (Make sure your data is accurate as you cannot delete the contact once it has been saved).
   
   
6. Click Save.
   
7. Click Exit.

Importing a Result into Medical Spectrum

1. Click the Medical Icon.
   
   
    
2. Click the Communication drop-down list.
   
   
    

3. Select Medical-Objects Letters, Medical-Objects Pathology, or Medical-Objects Radiology to see what results have arrived.
   
   
   
   

   

   
   
   
   

4. Click OK.
    
   
    

5. Click the Update at the Pathology Run Number message.
    
   
    
6. Click Result Matching to see if any results require matching.
    
7. The following window is displayed.
    
   
    
8. Click Auto-Match -2.
   
    
    
9. Click Yes.
   
   
    
10. Click OK.
     
11. Click Exit on the Pathology Result Matching window.
     
12. Click Exit on the Medical window.