This guide provides instruction on configuring MedTech Evolution software to send electronic results.
If you require any assistance with the installation or configuration, or if you have any questions, please contact the Medical-Objects Helpdesk on (07) 5456 6000.
If you have not Installed the Medical-Objects Download client, Please see the guide for Installing Capricorn on Windows.
Use only MedTech Evo Version 10.4.5 and above. |
Click the Setup button highlighted below.
Click Add, and add the following fields.
Specify File Mask
Move ACKs to Application ACK Folder
Override Sender HD fields to This value
Diagnostic Service Section Update
Route with Capricorn
Set file mask to *.hl7
Set HD to same values as Configuration → Practice Identifiers → Practice Identifier
Set the Diagnostic Service Section to Clinical letter or report [PHY] and tick Change if Valued.
Click Apply and OK
To ensure that messages are delivered correctly, You will need to make sure the provider Address Book is up to date. The following guide explains how to do this using the Medical Objects Provider lookup.
Choose the “Messaging Platform”, the “Message Type” & “Disposition/Reason”. Once done Click ‘Ok’ and it should send.
If you have to set the Healthlink Mailbox to N/A then you do not have the correct version of MedTech and will require an update. |